4
TO INSTALL AND REPLACE BATTERIES INTO THE PROJECTION ALARM CLOCK
The Projection Alarm Clock uses 2 x AA, IEC LR6, 1.5V batteries. To install and replace the batteries,
please follow the steps below:
1. Insert finger or other solid object in the space at the
bottom centre of the battery compartment and lift up to
remove the cover.
2. Insert batteries observing the correct polarity (see
marking).
3. Replace compartment cover.
In addition or instead of inserting batteries, the AC adaptor can be used:
1. Connect the power adaptor to a wall socket
2. Insert the adaptor into the jack at the bottom of the clock
To Next Page
Loading...
