Jumbo LED Display
Alarm Clock
Model: 30401 & 30402
DC: 020518
POWER UP
1. Insert the 120 volt power cord into the outlet,
then into your clock.
Optional: Insert one 9 volt battery for backup.
2. 12:00 will flash as an indication to set the time
and/or alarm.
SETTINGS
1. Slide the TIME/ALARM/RUN set switch to
the TIME position.
2. Press HOUR button to set the correct hour.
The PM indicator will light when in PM time.
3. Press MINUTE button to set the correct
minute.
4. Slide the TIME/ALARM/RUN set switch to
RUN after set your time.
CLOCK DIMMER SWITCH
Brighter: Slide the HI/LO display dimmer switch
to HI position.
Normal: Slide the HI/LO display dimmer switch to
LO position.
TIME ALARM
Loud: Slide the HI/LO/OFF alarm switch to
the HI position. The alarm indicator will show.
Regular: Slide the HI/LO/OFF alarm switch
to the LO position for choose regular alarm
sound.
OFF: Slide the HI/LO/OFF alarm switch to the
OFF position to turn the alarm OFF. The
alarm indicator will disappear.
ALARM VOLUME
1. Slide the TIME/ALARM/RUN set switch
to the ALARM position.
2. Press HOUR button to set the correct
hour. The PM indicator will light when in
PM time.
3. Press MINUTE button to set the correct
minute.
4. Slide the TIME/ALARM/RUN set switch
to RUN after set your time.
SNOOZE
When alarm sounds, press the SNOOZE button
to silence alarm for 9 minutes. Snooze function
will repeat until alarm BUTTON is turned to OFF
setting.
PM Light
Indicator
ALARM Light
Indicator
Time Display
Hour Button
Minute Button
Snooze Button
Battery Door
Hi/Lo Dimmer Switch
Time/Alarm/Run Set Switch
Alarm HI/LO/OFF Switch
Page | 2
Page | 3
To Next Page
Need help?
General
