To Next PageTo Next Page
Need help?Do you have a question about the Lab.gruppen PLM 12K44 and is the answer not in the manual?
General| Brand | Lab.gruppen |
|---|---|
| Model | PLM 12K44 |
| Category | Speaker System |
| Language | English |
Explains warning symbols and provides safety alerts for electrical hazards.
Describes the front panel layout, controls, display, and indicators.
Details the rear panel connections including inputs, outputs, and network ports.
Basic safety steps before connecting inputs/outputs and powering on the unit.
Details protection circuits like ISVPL, CPL, BEL, UVL, CAL, and temperature protection.
Describes integration with Lake Processing environment and control via software/front panel.
Introduces the front panel layout, controls, and basic modes of operation.
Describes Meter Mode and Menu Mode for device operation and configuration.
Explains how LEDs and the LCD indicate status, warnings, faults, and mutes.
Details the function of dynamic buttons, communication LED, and fault LEDs.
Summarizes LED color meanings for status, warnings, faults, and clips.
Lists warning conditions (yellow LED) and fault conditions (red LED).
Introduces Meter Mode and its various views like Home View.
Details the default view summarizing I/O gain, limiter reduction, and labeling.
Explains how to access and use Menu Mode for configuration and settings.
Details parameters for ISVPL and LimiterMax.
Provides configuration options for input routing and AES/Iso-Float settings.
Introduces the LoadSmart feature for speaker verification.
Explains how to initiate and view LoadSmart verification results.
Describes binding post and speakON connector options for speaker outputs.
Details analog input XLR connections and wiring.
Details the AES3 digital input connectors and signal format.
Describes the network connectors and their activity indicators.
Describes the power connector type and wiring.
Lists frame, temperature, PSU, and load-related warnings and faults.
Explains gain adjustments at various points for level control and muting.
Discusses maximizing volume capability and minimizing noise.
Discusses connecting digital audio sources like Dante and AES3.
Explains the digital clocking system and sample rate options.
Details Dante clocking technology and master/slave priorities.
