Chapter 8: Modifying Your Freeze Dryer Display
Product Service 816-333-8811 or 1-800-522-7658
41
Press MENU and the display will show:
Press and hold SELECT to change the status.
Press MENU and the display will show:
Press and hold SELECT to change the status.
Press MENU and the display will show:
Press and hold SELECT if you want to disable the moisture sensor.
Press MENU and the display will show:
Press and hold SELECT to change the status.
Press MENU and the display will show:
If you want to reset Total Hours, press and hold SELECT until an audible beep is
heard. The display will default to the main freeze dry display information.
If you do not want to set Total Hours, press MENU and the display will show:
The routine will repeat by pressing MENU or wait approximately 10 seconds for
the display to default to the main freeze dry information display information.
DEFROST HEATER:
NOT INSTALLED
SHELL FREEZER:
NOT INSTALLED
HOLD SELECT TO CLEAR
ALL TOTAL HOURS?
PURGE VALVE:
NOT INSTALLED
MOISTURE SENSOR:
INSTALLED
PRODUCTION MENU:
MASTER RESET?
To Next Page
Loading...
Need help?
General
