LabelTac 4 User Manual

WELCOME TO LABELTAC
®
- LET’S START LABELING
1 | UNBOX & CHECK CONTENTS
2 | CONNECT
3 | INSTALL SOFTWARE
QUICK START GUIDE
LabelTac
®
4 Thermal Transfer Printer
Included Accessories
Option 1: Install from CD
Option 2: Digital download
Software CD
Connect the USB cable to the back of your
printer and plug the other end into a USB
port on your computer.
Put the included CD in your computer’s CD drive and
follow the prompts on your screen to install the software.
Head to the LabelTac
®
support page, select your printer
model, and download the driver for your printer.
 labeltac.com/support
Connect the the two halves of the power
cable and plug into the power jack socket.
Plug the other end into a power outlet.
Power on your printer.
Note: It is important that your LabelTac
®
printer
is powered on before installing software.
USB Cable Power Cable 1/2” Supply
Adapter
Cleaning Swabs (2) Label Squeegee
1 2 3
DOWNLOAD THE USER MANUAL
The full LabelTac
®
4 User Manual can be downloaded
online at  labeltac.com/manuals
SUPPORT
Your LabelTac
®
printer includes a free, full lifetime
warranty on all parts and labor and unlimited support by
phone, email or live chat.
Online Support labeltac.com/support
Support by phone 1-877-356-6584
Support by email support@labeltac.com

LabelTac 4 Specifications

General

Print Resolution	300 dpi
Print Technology	Thermal Transfer
Display	LCD
Connectivity	USB 2.0
Print Speed	2 inches per second
Label Width Range	0.5 to 4.25 inches
Memory	8 MB
Supported Label Materials	Vinyl, Polyester, Polypropylene
Media Types	Continuous, die-cut

Summary

Unbox and Check Contents

Connect Printer

Connect USB and Power

Connect the USB cable to your printer and computer, then connect the power cable.

Power On Printer

Ensure the printer is powered on before installing software.

Install Software

Install from CD

Install the software using the included CD and on-screen prompts.

Digital Download

Download the printer driver from the LabelTac support page.

Download User Manual

Support Information

Load Label Supply

Prepare and Insert Supply

Adjust media holders, place the supply roll, and feed it through guides.

Load Print Ribbon

Install Ribbon Cartridge

Insert the ribbon onto the rear hub and tape the end to the front hub.