Labtech H150 Series User Manual

H50/150 Smart – User Manual
6
REAR VIEW
The rear panel consists of the following parts:
SPECIFICATION
The H50 series recirculating water chiller is designed to provide continuous supply of cooling
fluid at a constant temperature and flow rate. The unit consists of an air-cooled refrigeration
system, a plate heat exchanger, a recirculating pump, a reservoir and a microprocessor
temperature controller.
Technical specification:
Model
H50-500
/115V
H50-500
/DF
Temp. control range
-5℃～35℃
Temp. control mode
PID
Cooling mode
Compressor cooling
Temp. stability
±0.3 ℃
Refrigerant
R134A
Cooling capacity/W
500W@25℃
Pump capacity
3L/min@10psi
Reservoir volume
1,8L
Pressure
1Bar
Weight
28Kg
Dimension(LxWxHmm)
480×250×500mm
NOTE: the value of temperature stability is tested in standard operating mode.
Liquid Supply Connection
Liquid Return Connection
Electrical Socket
Liquid Drain

Labtech H150 Series Specifications

General

Brand	Labtech
Model	H150 Series
Category	Chiller
Language	English