Need help?Do you have a question about the LaCimbali M26 and is the answer not in the manual?
General| Voltage | 220-240 V |
|---|---|
| Groups | 2 |
| Hot Water Outlets | 1 |
| Steam Wands | 2 |
| Material | Stainless steel |
| Type | Semi-automatic |
| Boiler | Copper |
| Water Tank Capacity | Direct connection |
Symbols indicating electrical, trapping, and hot surface hazards.
Symbols for user type and environmental protection.
Information on machine packaging and handling.
Procedures for checking the appliance upon delivery.
Guidance on environmentally friendly disposal of packaging.
Specifications for water quality and pressure for the machine.
Instructions for connecting the water supply to the machine.
Pre-operation checks and initial machine flushing.
Procedures for safe operation of the machine.
Warnings about hot surfaces and proper handling of hot components.
Steps for safely shutting down the machine when unattended.
Step-by-step guide for manually powering on the DT version.
Configuration for automatic machine power management.
Details on standby, manual, and forced energy saving modes.
Icons for water level, resistance, and pre-heating status.
Icons for Wi-Fi, Bluetooth, USB, SD, and tech menu access.
Details on cup warmer heating for version A.
Details on cup warmer heating for version B.
How to set coffee dispensing volumes using self-learning.
How to set hot water dispensing volumes using self-learning.
General guidelines for heating milk for cappuccinos.
How to use the knob for gradual steam flow.
Procedure for cleaning steam nozzles after use.
Using Turbosteam to heat milk for frothy coffee.
Explains the different functions of Turbosteam selector keys.
Procedure for cleaning steam nozzles after Turbosteam use.
Monitoring and adjusting coffee flow for optimal dispensing.
Overview of the grinder-dispenser connectivity system.
How the BDS system recognizes filter holders and dispenses coffee.
Details on simultaneous, sequential, and single washing for coffee circuits.
Procedures for cleaning C version groups and filter holders.
Daily cleaning for steam and hot water nozzles.
Daily cleaning for grille, tray, and bodywork.
Table of common issues, causes, and solutions.
Explanations and verification for machine display messages.
How to set coffee dispensing volumes using self-learning.
How to set hot water dispensing volumes using self-learning.
How to view coffee and water dispensing counters.
Procedure for resetting dispensing counters to zero.
Accessing and modifying service time parameters.
How to change the display language of the machine.
Configuring ON/OFF times, day off, wash/water change schedules, and date/time.
Diagram showing wire colors for single-phase connections.
Instructions for installing a water feeding tap and pressure reducer.
How to change voltage connections on the transformer.
Listing of cleaning products available from Gruppo Cimbali.
To Next Page
