Need help?Do you have a question about the Lagler TRIO 900.65.00.100 and is the answer not in the manual?
General| Manufacturer | Lagler |
|---|---|
| Model | TRIO 900.65.00.100 |
| Category | Sander |
| Application | Floor sanding |
| Disc diameter | 200 mm |
| Sanding pad diameter | 200 mm |
| Sanding pressure | Adjustable |
| Rated voltage | 230 V |
| Voltage | 230 V |
| Weight | 77 kg |
| Sanding Width | 200 mm |
| Frequency | 50 Hz |
| Speed | 1800 rpm |
Details critical safety warnings regarding electrical shock, suffocation, explosion, and fire risks.
Provides essential safety guidelines for machine operation, maintenance, and workplace tidiness.
Provides step-by-step instructions for unpacking and preparing the TRIO machine for initial operation.
Guides users on correctly connecting the machine to the power supply, including safety precautions.
Details the correct procedure for safely starting the TRIO machine, including checks and precautions.
Covers mandatory inspections, testing intervals, and compliance with safety regulations like BGV A3.
Troubleshoots issues where the machine fails to start or stops unexpectedly, checking connections and power.
Addresses problems where the machine tries to start but fails, checking plate loading, temperature, and cables.
Solves issues of low sanding power, checking sanding media, mounting, temperature, and belt tension.
Identifies causes for vibration and noise, including media centering, mounting, belt condition, and loose fasteners.
Troubleshoots excessive dust creation, checking filter, dust bag, sealing, and hose connections.
Addresses sanding imperfections like waves or grooves, checking floor prep, media, mounting, and machine speed.
To Next Page
