Need help?Do you have a question about the Lagler HUMMEL and is the answer not in the manual?
General| Voltage | 230 V |
|---|---|
| Sanding drum width | 200 mm |
| Frequency | 50 Hz |
| Sandpaper size | 200 x 750 mm |
| Dust extraction | Yes |
| Sanding speed | 2400 rpm |
| Power | 2.2 kW |
Identifies safety devices that must be kept in perfect working order.
Lists critical warnings regarding electrical shock, suffocation, injury, and fire risks.
Provides essential safety guidelines for operating and maintaining the machine.
Instructions on safely connecting the machine to the mains power supply.
Procedure for starting the HUMMEL® machine for single-phase and three-phase motors.
Detailed steps for removing and installing new sanding belts on the machine.
Procedure to check and adjust the sanding belt tracking for optimal results.
Troubleshooting steps for a machine that fails to start or shuts down unexpectedly.
Diagnosing issues when the machine tries to start but fails to operate.
Solutions for low power output during machine operation.
Addressing common sanding issues like waves, strips, and grooves.
To Next Page
