Need help?Do you have a question about the Lagler Flip and is the answer not in the manual?
Highlights the key characteristics and components of the FLIP® machine for user familiarity.
Details the operational aspects of the FLIP®, including its sanding mechanism, motor, and attachments.
Specifies the approved applications for the FLIP® and prohibits unauthorized uses.
Identifies essential protective parts of the machine that must be kept in perfect condition.
Lists the standard included basic equipment and available optional accessories for the FLIP®.
Lists parts subject to wear and tear that require regular checks and potential replacement for safe operation.
Provides critical warnings about risks like death, injury, fire, and electrical shock.
Provides essential guidelines for safe operation, maintenance, and handling of the machine.
Details the information found on the machine's type plate, including manufacturer and serial number.
Presents key technical specifications of the FLIP® machine.
Guides users through the initial steps of unpacking and assembling the machine components.
Explains how to safely connect the machine to the power supply, including cable specifications.
Provides the procedure for safely starting the machine, including necessary precautions.
Details the correct and safe procedure for turning off the machine and disconnecting power.
Offers advice on safe and effective sanding techniques, pressure, and movement.
Step-by-step guide for removing and attaching Velcro sanding discs to the machine.
Instructions for replacing traditional sanding discs using a screw and tensioning disc.
Provides instructions for safely emptying the dust bag, including fire prevention and health risks.
Details how to properly transport and store the FLIP® machine to prevent damage and ensure safety.
Guidelines for cleaning and maintaining the machine to ensure proper functionality and prevent damage.
Instructions on how to properly adjust the tension of the V-belt to prevent excessive wear.
Step-by-step guide for removing and installing a new V-belt.
Procedure for replacing the entire sanding plate assembly, usually when the pulley is worn.
Guide on how to replace the motor pulley due to wear, ensuring proper V-belt function.
Instructions for replacing worn carbon brushes to maintain motor performance and prevent damage.
Ensures optimal dust extraction for safety and machine efficiency.
Details how to adjust guide rollers for optimal sanding results and machine aggressiveness.
Instructions for replacing worn or blocked wheels and guide rollers.
How to adjust the wall-protecting roller to prevent damage to walls or skirting boards.
Instructions for removing and installing a new wall-protecting roller.
Details mandatory inspection and maintenance requirements based on accident prevention regulations.
Addresses common issues preventing the machine from starting or causing it to stop unexpectedly.
Identifies reasons why the machine may attempt to start but fail, and how to resolve them.
Explains why the machine might lack sanding power and how to fix these issues.
Addresses causes for excessive vibration and noisy operation, and their solutions.
Identifies reasons for poor dust collection and suggests corrective actions.
Helps diagnose and resolve common sanding imperfections like waves, strips, or grooves.
A logbook to record maintenance dates, servicing company, and confirmations for machine upkeep.
Official declaration that the machine meets relevant European directives for safety and compatibility.
General| Brand | Lagler |
|---|---|
| Model | Flip |
| Category | Sander |
| Voltage | 230 V |
| Sanding Width | 150 mm |
| Sanding disc diameter | 150 mm |
| Sandpaper size | 150 mm |
| Dust Extraction | Yes |
| Dust extraction port | 50 mm |
| Frequency | 50 Hz / 60 Hz |
| Power | 1500 W |
To Next Page
