Lagler Flip - Protective Devices and Maintenance; Machine Configuration: Basic and Optional Equipment

FLIP
®
01.01.2019
English / Englisch
1.4 PROTECTIVE DEVICES
The following parts of the machine are protective devices and thus
must always be kept in perfect condition:
Attachment = Protection against sanding disc and
V-belt
Attachment cover = Dust protection, protection against
V-belt
Handle, motor housing, = Protection against current-carrying
switch box cover parts
1.5 MACHINE CONFIGURATION
1.5.1 BASIC EQUIPMENT
• 1 Machine ready for operation
• 1 Operating instructions
• 1 Dust bag
• 1 Extension cable 3 x 1.5 mm² (3 x 0.0023 sq.in.),
length 10 m (394”)
• 1 Universal spanner Torx T25
• 1 Cotton bag
• 1 Emptying fi xture
• 1 Waste bag
• 1 Cable tie
• 1 Velcro disc
• 1 Respiratory protection mask, filter class P3
1.5.2 OPTIONAL EQUIPMENT
• Long attachment
• Corner attachment
• Foldable earmuff
• Working light FLIP
®
INTRODUCTION
1
NOTE:
You will find the corresponding part
numbers for the optional equipment and
wearing parts in Section 11, Spare parts
FLIP
®
.
6