Lagler Flip - 13 EC Declaration of Conformity; EC Declaration of Conformity

EC DECLARATION OF CONFORMITY
Copyright © Eugen Lägler GmbH, 2019 – All rights reserved – Translation of original operating instructions FLIP
®
– 12 / January 1, 2019 – Printed on chlorine-free bleached paper. Part number 00.320.20.002
No guarantee is provided for the contents of these operating instructions. No liability is assumed for errors or damages which arise from the use of these operating instructions. Subject to changes.
EC Declaration of conformity for machines
(EC Directive 2006/42/EC)
The manufacturer Eugen Lägler GmbH, Kappelrain 2, D-74363 Güglingen-Frauenzimmern, Germany
Tel.: 0049 - 7135 - 98 90-0 · Fax: 0049 - 7135 - 98 90-98
E-Mail: info@laegler.com · http://www.laegler.com
certified herewith,
that the machine Generic denomination: Floor sanding machine
Function: Dry sanding of wooden floors, wooden stairs
Model: FLIP
®
Serial number: See type plate
Commercial name: Edge-, corner- and stair-sanding machine
fulfils all the relevant provisions of the specified above European Directive.
The machine also fulfils all the relevant provisions of the European Directive
Electromagnetic Compatibility (2014/30/EU).
The following harmonized standards have been applied:
DIN EN ISO 12100: Safety of machinery - General principles for design - Risk assessment and risk reduction
DIN EN 60204-1: Safety of machinery - Electrical equipment of machines - Part 1
DIN EN 55014-1: Electromagnetic compatibility - Requirements for household appliances, electric tools and similar
apparatus - Part 1
DIN EN 55014-2: Electromagnetic compatibility - Requirements for household appliances, electric tools and similar
apparatus - Part 2
DIN EN 61000-3-2: Electromagnetic compatibility (EMC) - Part 3-2: Limits
DIN EN 61000-3-3: Electromagnetic compatibility (EMC) - Part 3-3: Limits
13
www.laegler.com
FLIP
®
Serial number:
Year of manufacture:
Technical file at: Eugen Lägler GmbH, Kappelrain 2
D-74363 Güglingen-Frauenzimmern
Germany
64