HUMMEL
®
01.01.2019
English / Englisch
NOTE:
You will find the corresponding part
numbers for the optional equipment and
wearing parts in Section 11, Spare parts
HUMMEL
®
.
1.5.2 OPTIONAL EQUIPMENT
• Carrying handle
• TransCart
• Safety belt
• Foldable earmuff
• Safety switch for fault current PRCD-S (for German mains
supply)
1.5.3 WEARING PARTS AND SAFETY-RELATED PARTS
Check the condition of the wearing parts and the safety-related
parts mentioned below at regular intervals in order to be able to
work safely and optimally at all times.
Replace the following parts in case of wear and/or damage:
• Extension cable
• Motor cable
• ON/OFF switch
• Sealing felt
• MultiClip
• V-belts
• V-belt pulleys
• Belt tensioner
• Sanding drum
(in case of daily use, exchange every 1 - 2 years)
• Tensioning roller of the drive unit
(in case of daily use, exchange every 1 - 2 years)
• Guide rollers at the drive unit
• Guide roller at the machine housing
• Side cover
• Dust bag
• O-ring used as a strain relief
• Rear wheel
• Lateral wheels
INTRODUCTION
1
7