Laguna Tools Laser EX - Connection Diagrams

2. Setup
11
2. Setup
CO2 Laser Machine © 2018 Laguna Tools 8/27/2018
EN
2.2 Connection Diagrams
TX (MCNCLTLCO2MU2012-40W)
Fig C018: Connections Diagram for TX-Series CO2 Laser Machine.
Connect all Auxiliary components as shown in C018. Explore further instructions on
how to set up each axillary unit in the following setup sections. For further electrical
diagrams, see A1. Wiring .
EX & MX (MCNCLTLCO2EC2436-80W, MCNCLTLCO2EC3652-
150W)
Fig C019: Connections Diagram for MX & EX-Series CO2 Laser Machine.
Connect all Auxiliary components as shown in C019. Explore further instructions on
how to set up each axillary unit in the following setup sections. For further electrical
diagrams, see A1. Wiring .
23
23