3
Safety Rules-
As with all machinery, there are certain hazards involved with the operation and use. Using it with
caution will considerably lessen the possibility of personal injury. However, if normal safety precautions
are overlooked or ignored, personal injury to the operator may result. If you have any questions relative
to the installation and operation, do not use the equipment until you have contacted your supplying
distributor. Read carefully before operating the machine:
1) Keep the working area clean and be sure adequate lighting is available.
2) Do not wear loose clothing, gloves, bracelets, necklaces or ornaments. Wear face, eye, respiratory
and body protection devices as indicated for the operation or environment.
3) Be sure that the power is disconnected from the machine before tools are serviced or an attachment
is to be fitted or removed.
4) Never leave the machine with the power on.
5) Do not use dull, gummy or cracked cutting tools.
6) Be sure that the keys and adjusting wrenches have been removed and all the nuts and bolts are
secured.
To Next Page
