Machine Specifications SS2
Motor Drive+A2:A39 Delta brand VFD-E variable frequency drive.
Spindle 11 HP HSD (Italian) Electrospindle ISO-30 (ATC), Ceramic Spindle Bearings.
Spindle RPM 6,000 - 24,000 RPM
Dust Chute Diameter 4" Inches
Volts 208-220 volts 1 or 3 phase
Amps Dependent on the Vacuum Pump Selection.
48" x 48" x 9.5" axis travel (4' x 4' Model)
48" x 96" x 9.5" axis travel (4' x 8' Model)
60" x 120" x 9.5" axis travel (5' x 10' Model)
60" x 144" x 9.5" axis travel (5' x 12' Model)
Gantry Clearance 11" Inches
48.0" x 48.0" (4' x 4' Model)
48.0" x 96.0" (4' x 8' Model)
60.0" x 120.0" (5' x 10' Model)
60.0" x 144.0" (5' x 12' Model)
Rapid Travel/Cutting Speed
Heavy-Duty Welded Tubular Steel Frame
80" x 80" (4' x 4' Model)
80" x 140" (4' x 8' Model)
90" x 160" (5' x 10' Model)
90" x 184" (5' x 12' Model) `
Laguna “Touch” Series CNC Controller. Machine features the Networking,
Connectivity and online Troubleshooting. Runs industry standard "G-Code".
Program transfer to the controller can be accomplished with USB, Ethernet.
To Next Page
