laguna Max-Flo 2400 - User Manual

20
00
2400
2900
900
1500
600
75
00
9000
3500
6000
2200
11000
230-240V 50Hz
120V 60Hz
Installation and
Maintenance Guide
READ THOROUGHLY BEFORE ATTEMPTING INSTALLATION AND KEEP
FOR FUTURE REFERENCE
Einbau- und
Wartungsanleitung
SORGFÄLTIG VOR BEGINN DER INSTALLATION DURCHLESEN UND FÜR SPÄTERE
VERWENDUNG AUFBEWAHREN
Notice d’installation et
d’entretien
LIRE SOIGNEUSEMENT AVANT D’ENTREPRENDRE L’INSTALLATION DE L’APPAREIL.
CONSERVER CETTE NOTICE POUR RÉFÉRENCES ULTÉRIEURES.
Guía de instalación y
mantenimiento
LEA ATENTAMENTE ESTE FOLLETO ANTES DE INTENTAR
LA INSTALACIÓN Y GUARDE ESTAS INSTRUCCIONES
COMO REFERENCIA EN UN FUTURO
60mm
5mm
2
3
/
8
"
3
/16
"
8mm
5
/16
"
8mm
5
/16
"
Template for mounting the pump
to a fixed base
The pump has two keyhole-shaped slots at the bottom of the cage that allow you to
fasten the pump to a fixed base using the screws and, if necessary, the plug anchors
(for cement bases) provided.
Use this template to determine the exact position of the screws on the fixed base.
Note that the base must be elevated, solid, and secure.
Modèle pour le montage de la pompe à une
base fixe
La pompe est munie de deux ouvertures en forme de trous de serrure situées sous le
boîtier vous permettant d’attacher la pompe à une base fixe à l’aide des vis, et si
nécessaire, à l’aide des ancrages (pour base de ciment) qui sont fournis.
Utiliser ce modèle pour déterminer la position exacte des vis sur la base fixe. Noter
que la base doit être élevée, solide et stable.
Schablone zur Montage der Pumpe auf
einem fest montierten Sockel
Die Pumpe weist am Korbboden zwei schlüssellochförmige Schlitze auf, die es Ihnen
gestatten, sie mittels der mitgelieferten Schrauben bzw. Dübel (für Zementsockel) auf
einem fest montierten Sockel anzubringen.
Verwenden Sie diese Schablone, um die genaue Position der Schrauben auf dem fest
montierten Sockel zu bestimmen. Beachten Sie, dass der Sockel erhöht liegen und
solide und sicher montiert sein muss.
Plantilla para montar la bomba a una base
fija
La bomba tiene dos ranuras tipo ojo de cerradura en la parte inferior de la jaula que
permiten sujetar la bomba a una base fija usando los tornillos y, si fuera necesario,
los sostenes del enchufe (para las bases de cemento) provistos.
Utilice esta plantilla para determinar la posición exacta de los tornillos con respecto
a la base fija. Sírvase notar que la base debe estar elevada, ser sólida
✁
Jolie Products Inc

Summary

Pump Mounting Template

Template for Mounting the Pump

Use this template to determine the exact position of screws on the fixed base.

Important Safety Instructions

Read and Follow All Safety Instructions

Read all safety instructions and notes on the unit before operating.

Save Instructions for Future Reference

Keep these instructions for future reference.

Additional U.S. Instructions

Specific instructions for users in the United States.

Pump Installation and Maintenance

General Pump Information

Information on pump suitability for filters and waterfalls.

Pump Cage Operation

Details on how to open, close, and maintain the pump's protective cage.

Pump Maintenance Procedures

Guidance on cleaning and maintaining the pump for optimal performance.

Troubleshooting Pump Issues

Low Flow and No Flow Solutions

Steps to diagnose and resolve pump flow problems.

Product Warranty Information

Warranty Details

Information on the 3-year warranty against defects in material or workmanship.

Winterizing Your Pump

Winterizing Procedure

Step-by-step guide to prepare the pump for winter storage.

Product Service and Support

Customer Service Contact

How to contact customer service for assistance with product operation.

Authorized Warranty Repair Service

Instructions for returning defective products for warranty repair.

laguna Max-Flo 2400 Specifications

General

Flow Rate	2400 GPH
Power Consumption	190 W
Voltage	115V
Outlet Size	1.5 inches
Cord Length	16 ft
Hose Diameter	1.5 inches