To Next PageTo Next Page
Need help?Do you have a question about the laguna MAX-FLO PT8244 and is the answer not in the manual?
Provides comprehensive instructions for installing and maintaining the MAX-FLO pump.
Details the technical specifications of various MAX-FLO pump models, including flow rates and head heights.
Lists part numbers for replacement components for different MAX-FLO pump models.
Outlines essential safety rules to prevent injury, electrical shock, and equipment damage.
Explains pump capabilities, ideal placement, and limitations for optimal performance.
Guides on attaching an optional intake strainer for specific pump models for limited-space applications.
Details the procedure for safely opening and closing the pump's protective cage.
Instructions on how to start and run the pump after correct installation.
Steps to clean the pump cage, ensuring proper water flow and preventing performance degradation.
Instructions for cleaning impeller, impeller well, and cover for optimal pump function and longevity.
Guidance on replacing wear-prone internal pump components to maintain performance.
Identifies common causes and solutions for reduced water output from the pump.
Diagnoses reasons for complete lack of water flow and provides corrective actions.
Steps for preparing and storing the pump during winter to prevent damage from freezing.
Provides phone numbers for customer assistance and technical support in different regions.
Information on returning products for warranty repair or service through authorized channels.
General| Model | PT8244 |
|---|---|
| Type | Submersible Water Pump |
| Voltage | 120 V |
| Cable Length | 16 ft |
| Material | Plastic |
| Housing Material | Plastic |
| Impeller Material | Plastic |
| Max Flow Rate | 800 GPH |
| Inlet/Outlet Size | 3/4 inch |
| Outlet Diameter | 3/4 inch |
