LAI Games MEGA STACKER LITE User Manual

Operator's Manual – Mega Stacker Lite
© LAI GAMES
Page 2
MACHINE INSTALLATION and INSPECTION
When installing and inspecting “Mega Stacker Lite”, be very careful of the following
points and pay attention to ensure that the players can enjoy the game safely.
 Be sure to turn the power OFF before working on the machine.
 Make sure the power cord is not exposed on the surface (floor, ground, etc.) where
people walk.
 Check that the rubber glide feet levelers are set correctly on the floor so that the
game cabinet is level and stable.
 Always make complete connections for the integrated circuit (IC) logic PC Boards
and other connectors. Insufficient insertion can damage the electrical components.
 Only qualified personnel should inspect or test the integrated circuit (IC) logic PC
Boards.
 If any integrated circuit (IC) logic PC Boards should need servicing. Please contact
the nearest LAI Games Distributor. (Refer to the back page of this manual)
INTRODUCTION
* CAUTION! *
Before
Switching the machine on be sure to check that it has been set on the
correct voltage for your area!
Refer
To the mains voltage adjustment section of this manual. Machines are
normally shipped on 220V AC unless otherwise specified.
* WARNING! *
Always Turn OFF
mains power before removing safety covers and refit all safety
covers when work is completed.

LAI Games MEGA STACKER LITE Specifications

General

Brand	LAI Games
Model	MEGA STACKER LITE
Category	Game Console
Language	English