What to do if LAI Games Timebuster show Err2?
If your LAI Games Arcade Game Machines display Err2, clear any coin switch jams. This issue may be caused by customers tampering with the coin mechanisms. If the problem is resolved, the MCU will automatically clear the error after 30 seconds.
How to fix Err1 on LAI Games Timebuster?
To fix Err1 on LAI Games Arcade Game Machines, clear any ticket jams or replenish the tickets/capsules. Afterward, press the Test button once to clear the error.
What to do if LAI Games Timebuster Arcade Game Machines show Err4?
If LAI Games Arcade Game Machines display Err4, refill the Prize Arms or test the sensor using the switch test.
How to resolve Err5 on LAI Games Timebuster Arcade Game Machines?
To resolve Err5 on LAI Games Arcade Game Machines, clear any blockage from between the prize sensors or test the sensor using the switch test.
How to troubleshoot Err8 on LAI Games Timebuster?
To troubleshoot Err8 on LAI Games Arcade Game Machines, try reducing the P12 setting and the value of consolation prizes, or reduce P06, the consolation prize range.
How to resolve Err9 on LAI Games Timebuster?
To resolve Err9 on LAI Games Arcade Game Machines, try increasing the P12 setting and the value of consolation prizes, or increase P06, the consolation prize range.
What should I do if LAI Games Arcade Game Machines display Err3?
Send the MCU PCB to the closest LAI Games distributor for repair.
General| Category | Arcade Game Machines |
|---|---|
| Manufacturer | LAI Games |
| Developer | LAI Games |
| Cabinet | Upright |
| Players | 1 |
| Control | Buttons |
| Display Type | LCD |
Defines warning, caution, and note symbols used throughout the manual.
Covers essential electrical safety measures and proper installation guidelines.
Outlines critical checks before operating the machine, ensuring safe setup.
Specifies that only qualified personnel should service integrated circuit PC boards.
Introduces the "Time Buster" as a one-player prize vending game with timing skill challenges.
Details the condition of the machine upon arrival and recommended handling procedures.
Lists the machine's physical measurements, weight, and power consumption details.
Specifies the necessary mains voltage, frequency, and grounding for operation.
Defines optimal ambient conditions for machine placement and performance.
Describes the process of removing the locking pin and attaching prizes securely with hanging ties.
Explains how to load prizes onto the prize arm and position them correctly for optimal presentation.
Details the game's goal of hitting '1000' for a jackpot and winning consolation prizes.
Guides players on how to select their prize and initiate the dispensing process.
Lists and briefly describes the five main operational modes of the game.
Explains how to activate and use Attract, Coin Play, and Free Play operational modes.
Offers advice on setting payout percentages for maximum game earnings.
A table summarizing recommended prize values and win frequencies based on play price.
Covers entering, exiting, and managing the Test Mode for diagnostics.
Details procedures for testing the game's audio, lighting, and digital display components.
Explains how to test all game switches and provides a reference table for their codes.
Describes the process for testing the functionality of prize arms, their lights, and motors.
Introduces the thirteen programmable adjustments (P1-P13) for game configuration.
Outlines the steps for entering, selecting, changing, and exiting the programming mode.
Details adjustments for coin insertion and number of plays per credit for coin mechanisms.
Explains the P05 setting for adjusting the difficulty of winning jackpot prizes.
Details P06 for the consolation prize range and P07 for difficulty adjustment.
Covers attract mode sound, free play prizes, and automatic/manual adjustment settings.
Details P11 for automatic jackpot wins and P12 for automatic consolation wins.
Explains adjustments for mercy tickets/capsules and the mercy system mode.
Explains the use of audits for analyzing game performance and optimizing earnings.
Details the procedure for accessing, navigating, and resetting audit data.
Details specific audits for jackpot prizes dispensed from prize arms 1 through 3.
Details audits for consolation prizes dispensed from prize arms 4 through 8.
Covers audits for games that did not win a prize and the total number of games played.
Details audits for total jackpot wins and manufacturer-specific audits.
Explains how to view the results of the last five games played.
Guides on entering, selecting, and displaying score history data.
Lists common error codes, their descriptions, and initial troubleshooting solutions.
Provides detailed guidance for resolving various errors, including hardware and software issues.
Details troubleshooting steps for ticket/capsule dispenser and coin errors.
Covers troubleshooting EEPROM faults and issues with the prize sensor.
Addresses prize sensor blockages/faults and automatic software error conditions.
Emphasizes the importance of reading safety and service instructions before maintenance.
Illustrates the physical locations of all fuses within the machine.
Provides comprehensive details on the rating and function of each specific fuse.
A visual guide showing the placement of all major internal components.
Advises that technical section requires basic knowledge of electronics and components.
Explains how to adjust the machine's voltage setting via transformer pin configuration.
Details the use of the switch on the power supply to select the correct mains voltage range.
Illustrates wiring from the power supply to the 32-channel AC driver board.
Depicts wiring for the 16-way DC driver, control panel, and sound PCBs.
Shows the wiring diagram for the 4-digit display and associated lighting elements.
Details the specific wiring connections to the 16-channel DC driver board for motor control.
Illustrates the power entry module and how power is distributed throughout the machine.
Provides wiring information for optional ticket/capsule dispensers and Mars Bill Acceptors.
Outlines the duration and scope of the manufacturer's limited warranty.
Details the necessary steps and documentation for submitting a warranty claim.
Lists contact details for sales, technical support, and the company website.
To Next Page