Need help?Do you have a question about the Lainox ME 061 P and is the answer not in the manual?
General| Brand | Lainox |
|---|---|
| Model | ME 061 P |
| Category | Convection Oven |
| Language | English |
Read manual for safety during installation, operation, and maintenance. Keep manual accessible.
Be aware of hot surfaces, ensure ventilation, and switch off immediately if faulty.
Switch off appliance when finished, avoid salt deposits, handle steam carefully, keep vents clear.
Failure to observe basic safety guidelines can cause danger; manufacturer not liable for alterations.
Use knob 25 to set the desired cavity temperature, shown on the display.
Use knob 26 to set cooking time or infinite time [Inf].
Press key 16 to start; LED indicates cooking is in progress.
Use knob 25 to set the temperature for the first cooking cycle.
Use knob 26 to set cooking time for Cycle 1, including infinite time for preheating.
Select and confirm settings for cycles 2 to 9 using keys and knobs.
Switch on oven and select program number using keys and knobs.
Set preheating temperature and infinite time for Cycle 1.
Wait for automatic saving or press key 16 to start cooking with the saved sequence.
Start programs with or without preheating, or with preheating excluded.
Irregularities indicated by display messages and beeps; error codes guide technicians.
Messages for probe fault (Err Sc), no water (no H2o), and motor overload (Er 1).
To Next Page