Lainox P Series User Manual

10
90024140rev00
5.5 • START
Press key 16.
The LED associated with the key remains
permanently alight.
At this point...
the temperature display indicates the
actual oven temperature.
The time display indicates the time
remaining to complete cooking (sum of
times of each single phase).
5.6 • END OF COOKING
A beep will be generated to indicate that
cooking has terminated (LED next to
key 16 off). Just open the door to stop the
beeping.
Remove the food from the oven, following
the directions given under paragraph 2.7 of
the “Points to remember” heading.
Displaying and changing saved values
If, during cooking, it is necessary to check
the settings, press the cooking cycle key,
the displays will blink for 10 sec..
If the values displayed have to be modified,
use the relevant knob or press key 18 and
turn knob 26 to pass on to the following
cycle.
After approx. 10 sec. (TIME-OUT) the new
data are saved automatically and the
displays show the actual values.
OPERATIONS
5 • MANUAL SETTINGS FOR COOKING
WITH UP TO 9 CYCLES IN SEQUENCE
STARTING THE COOKING PROGRAM

Lainox P Series Specifications

General

Brand	Lainox
Model	P Series
Category	Convection Oven
Language	English