- 4 - - 5 -
2) Mounting slot
Insert the suction cup mount here and secure it to the vehicle glass.
3) RESET button
Located in the „R“ hole for resetting the device.
4) MicroSD card slot
For data storage.
5) LED indicator
Flashes during recording; stable in standby mode.
6) MENU button
Short press to open the function settings menu. Hold to switch between video
recording, photo taking and gallery viewing modes.
7) UP button
Navigate up in the settings menu.
8) DOWN button
Navigate down in the settings menu; press briefly during recording to toggle
audio recording.
9) OK button
Confirm selections; start/stop recording in camera mode.
10) Lens
Sensor module for scene detection.
11) Speaker
Outputs device sound.
12) USB-C input
For charging, power supply during operation, and data transfer.
13) Microphone
Two microphone jacks: one for recording sound and one for receiving sound.
To Next Page
Loading...
