To Next PageTo Next Page
Need help?Do you have a question about the Lamborghini Caloreclima NINFA 24 MCS and is the answer not in the manual?
General| Category | Boiler |
|---|---|
| Mounting | Wall-mounted |
| Heat output | 24 kW |
| DHW output | 24 kW |
| Nominal Heat Output | 24 kW |
| Ignition | Electronic |
| Fuel Type | Natural Gas |
| Dimensions (H x W x D) | 700 x 400 x 280 mm |
| Water Pressure | 3 bar |
| Safety Features | Frost protection, Overheat protection |
Introduces the Lamborghini wall-mounted boiler and its manual for safe operation.
Explains the functions, indicators, and layout of the boiler's control panel.
Details the procedure for powering the boiler on and off, including essential safety precautions.
Covers changing operating modes (summer/winter) and adjusting heating temperatures for comfort.
Stresses that installation must be performed by qualified personnel following all relevant regulations.
Provides guidance on selecting a suitable, well-ventilated, and safe location for boiler installation.
Details requirements for system capacity and plumbing connections, including safety valve discharge.
Outlines procedures for safely connecting the gas supply, ensuring correct fuel type and tight connections.
Covers safe connection to the electrical grid, earthing, and optional room thermostat wiring.
Explains requirements for fume exhaust systems, including pipe lengths and diaphragm installation.
Describes gas supply conversion procedures and how to activate TEST mode for system checks.
Details pre-lighting checks, operational checks, and parameter verification for initial boiler use.
Outlines essential yearly checks for safety devices, component cleanliness, and system tightness.
Lists fault codes, their possible causes, and recommended cures for diagnosing and resolving boiler issues.
Provides detailed physical dimensions and connection point specifications for the boiler unit.
Offers an illustrated overview of the boiler's internal main components and their respective labels.
Illustrates the internal plumbing layout, showing the flow of water and gas through the system.
Presents key technical specifications, performance data, and electrical absorption details for the unit.
Includes performance diagrams such as pressure-power curves and pump head/pressure loss charts.
Shows the electrical connections and component layout, crucial for installation and troubleshooting.
