To Next PageTo Next PageWhat does exchanger protection activation mean for my Lamborghini Caloreclima Boiler?
If the 'Exchanger protection' is activated on your Lamborghini Caloreclima Boiler, it might be due to no system circulation. Check the circulating pump. Also, air in the system can cause this, so vent the system.
What to do if the overtemperature protection is activated on my Lamborghini Caloreclima TAURA D 24 MCA?
If the overtemperature protection is activated on your Lamborghini Caloreclima Boiler, it may be due to a damaged heating sensor. Check its positioning and operation. Another cause might be lack of water circulation in the system, so check the circulating pump. Finally, trapped air can cause this issue; vent the system to resolve it.
How to fix a gas valve fault in my Lamborghini Caloreclima TAURA D 24 MCA Boiler?
If your Lamborghini Caloreclima Boiler displays a gas valve fault, start by checking the wiring connections to the gas valve. If the wiring is secure, the gas valve itself may be faulty and require inspection and potential replacement.
What causes a gas valve fault in a Lamborghini Caloreclima TAURA D 24 MCA Boiler?
If your Lamborghini Caloreclima Boiler is showing a gas valve fault, begin by inspecting the wiring. If the modulating operator wiring is disconnected, ensure it is properly reconnected. If the wiring is intact, the gas valve itself may be faulty and require inspection and possible replacement.
How to troubleshoot a DHW sensor fault in a Lamborghini Caloreclima TAURA D 24 MCA Boiler?
If your Lamborghini Caloreclima Boiler displays a 'DHW sensor fault', the sensor might be damaged, or there could be wiring issues. Check the wiring for any shorts or disconnections. If the wiring is intact, consider replacing the sensor.
What does 'Delivery sensor 2 fault' mean on my Lamborghini Caloreclima TAURA D 24 MCA?
If your Lamborghini Caloreclima Boiler is showing a 'Delivery sensor 2 fault', it could be due to a damaged sensor or wiring problems. Check the wiring for any shorts or disconnections. If the wiring seems fine, consider replacing the sensor.
What does card parameter fault mean on my Lamborghini Caloreclima TAURA D 24 MCA Boiler?
If your Lamborghini Caloreclima Boiler displays a 'Card parameter fault', it indicates a wrong card parameter setting. To resolve this, check the card parameter and modify it as needed.
What to do if my Lamborghini Caloreclima Boiler shows incorrect system water pressure?
If your Lamborghini Caloreclima Boiler indicates 'Incorrect system water pressure', the water pressure switch might be damaged or not connected. Check the sensor to resolve this issue.
Why is my Lamborghini Caloreclima Boiler showing a flame present signal when the burner is off?
If your Lamborghini Caloreclima Boiler displays a 'Flame present signal with burner off', the electrode might be faulty; check the ionisation electrode wiring. Alternatively, the card itself could be faulty; in that case, check the card.
What does delivery sensor 1 fault mean in Lamborghini Caloreclima Boiler?
If your Lamborghini Caloreclima Boiler displays a 'Delivery sensor 1 fault', the sensor might be damaged, or there could be wiring issues. Check the wiring for any shorts or disconnections. If the wiring is intact, consider replacing the sensor.
General| Fuel Type | Gas |
|---|---|
| Heat Output | 24 kW |
| Dimensions (HxWxD) | 700x400x299 mm |
| Ignition | Electronic |
| Type | Condensing |
| Fuel | Natural gas / LPG |
| NOx emissions | Class 6 |
Explains the boiler's control panel layout, buttons, and display indicators for operation.
Covers temperature adjustments (heating/hot water), mode switching, and comfort settings.
Outlines procedures for water system connections, safety valve, and antifreeze considerations.
Details the requirements and safety measures for connecting the boiler to the gas supply.
Explains correct electrical connection procedures, earthing, and safety precautions.
Covers gas conversion, test mode activation, and burner pressure adjustment procedures.
