Need help?Do you have a question about the Lamborghini Caloreclima Xilo T 20 MS W TOP and is the answer not in the manual?
General| Brand | Lamborghini Caloreclima |
|---|---|
| Model | Xilo T 20 MS W TOP |
| Category | Boiler |
| Language | English |
Essential safety guidelines for installation, use, and maintenance of the boiler.
Overview of automatic operation, modulation, ignition, and key components like pressure switches and heat exchangers.
Diagram and legend identifying all major parts of the XILO T 20 MS W TOP boiler.
Visual representation of the boiler's physical dimensions and mounting details.
Details on thermal capacity, connections, operating pressure, expansion tank, and weight.
Table and graph detailing calibration for Natural Gas and Liquid Gas types, including jets pressure and burner output.
Details on voltage, frequency, absorbed power, protection index, and noise level.
Step-by-step guide with illustrations for accessing the boiler's electrical and electronic components.
Detailed schematic showing electrical connections, components, and control panel layout.
Explains warning lights for ignition shutdown, no water, sensor faults, and TST shutdown, with reset procedures.
Guide to configuring jumpers (JP1, JP3, JP4, JP5) for LPG/Methane, post-circulation, and heating timer settings.
Steps for connecting system supply, return, cold water, and hot water pipes using the template.
Recommendations on pipe diameter, elbows, and system flushing to avoid noise and damage.
Diagram illustrating the water circuit with a legend identifying key components like the circulator, heat exchanger, and safety valves.
Instructions for carefully opening the carton and removing boiler parts and accessories.
Guide to using the wall template for positioning, marking holes, and preparing the flue exit.
Guidelines for qualified personnel, compliance with regulations, and requirements for fume evacuation.
Procedures for connecting the gas supply using approved pipes and checking for leaks.
Steps for filling the system with water, bleeding air, and initiating the burner ignition sequence.
Explains sealed chamber operation and options for concentric or double pipe fume evacuation and air intake.
Illustrates various methods for connecting flue pipes and air intake systems, categorized by type.
Instructions for fitting concentric flue pipes, including elbow positioning and diaphragm selection.
Guidelines for double flue pipe installation, covering maximum lengths and modifications based on fittings.
Explains adjustment of slow ignition (RLA) and heating output (R MAX) via trimmers.
Detailed procedure for adjusting maximum and minimum outlet pressures using specific nuts and screws.
Instructions for safely powering down the boiler for extended periods or temporary use.
Comprehensive list of checks for burners, heat exchangers, fan, connections, combustion, and safety devices, plus cleaning instructions.
Steps for converting the boiler from Natural Gas to Liquid Gas, including jet and diaphragm changes.
A table detailing common faults like no ignition, smell of gas, condensation, and their respective causes and remedies.
To Next Page
