To Next PageTo Next PageHow do I resolve a heating sensor fault in my Lamborghini Caloreclima TAURA D 24 MCA Boiler?
If your Lamborghini Caloreclima Boiler is showing a 'Heating sensor fault', the sensor may be damaged and needs replacement.
Why is my Lamborghini Caloreclima Boiler showing a flame present signal when the burner is off?
If your Lamborghini Caloreclima Boiler displays a 'Flame present signal with burner off', the electrode might be faulty; check the ionisation electrode wiring. Alternatively, the card itself could be faulty; in that case, check the card.
What does exchanger protection activation mean for my Lamborghini Caloreclima Boiler?
If the 'Exchanger protection' is activated on your Lamborghini Caloreclima Boiler, it might be due to no system circulation. Check the circulating pump. Also, air in the system can cause this, so vent the system.
What to do if my Lamborghini Caloreclima Boiler shows incorrect system water pressure?
If your Lamborghini Caloreclima Boiler indicates 'Incorrect system water pressure', the water pressure switch might be damaged or not connected. Check the sensor to resolve this issue.
How to fix a card parameter fault on a Lamborghini Caloreclima TAURA D 24 MCA Boiler?
If your Lamborghini Caloreclima Boiler is indicating a 'Card parameter fault', it is likely due to a wrong card parameter setting. Check the card parameter and modify it if necessary.
What does card parameter fault mean on my Lamborghini Caloreclima TAURA D 24 MCA Boiler?
If your Lamborghini Caloreclima Boiler displays a 'Card parameter fault', it indicates a wrong card parameter setting. To resolve this, check the card parameter and modify it as needed.
General| Fuel Type | Gas |
|---|---|
| Heat Output | 24 kW |
| Dimensions (HxWxD) | 700x400x299 mm |
| Ignition | Electronic |
| Type | Condensing |
| Fuel | Natural gas / LPG |
| NOx emissions | Class 6 |
Explains the boiler's control panel layout, buttons, and display indicators for operation.
Covers temperature adjustments (heating/hot water), mode switching, and comfort settings.
Outlines procedures for water system connections, safety valve, and antifreeze considerations.
Details the requirements and safety measures for connecting the boiler to the gas supply.
Explains correct electrical connection procedures, earthing, and safety precautions.
Covers gas conversion, test mode activation, and burner pressure adjustment procedures.
