LAMBORGHINI R3 EVO 100 - Wheel Rim to Hub Tightening Torques

0-32
INTRODUCTION
0.5 - WHEEL RIM TO HUB SCREWS AND NUTS TIGHTENING TORQUES
DANGER
These tightening torques are not applicable to special self-locking xing systems.
Table 28
P/N DESCRIPTION CLASS TIGHTENING TORQUE TOLERANCE
2.0122.511.6 Screw M14x1.5 8.8 120 Nm (12.2 kgm) ± 5%
2.0122.615.2 Screw M16x1.5 8.8 184.5 Nm (18.8 kgm) ± 5%
2.0399.235.6 Screw M16x1.5 10.9 271 Nm (27.6 kgm) ± 5%
2.0399.129.6 Screw M18x1.5 10.9 395 Nm (40.3 kgm) ± 5%
2.0399.140.6 Screw M18x1.5 10.9 395 Nm (40.3 kgm) ± 5%
2.0399.003.6/10 Screw M20x1.5 10.9 550 Nm (56 kgm) ± 5%
2.1011.308.6 Nut M14x1.5 8 120 Nm (12.2 kgm) ± 5%
01101323 Nut M18x1.5 10 395 Nm (40.3 kgm) ± 5%
2.1099.175.6 Nut M18x1.5 10 395 Nm (40.3 kgm) ± 5%
0.012.8307.0 Nut M20x1.5 10 550 Nm (56 kgm) ± 5%
2.1019.176.6 Nut M20x1.5 10 550 Nm (56 kgm) ± 5%
2.1099.083.0/20 Nut M20x1.5 10 550 Nm (56 kgm) ± 5%
01104070 Nut M20x1.5 10 550 Nm (56 kgm) ± 5%
2.1099.085.0/20 Nut M22x1.5 10 745 Nm (76 kgm) ± 5%
2.1099.177.6 Nut M22x1.5 10 650 Nm (66.2 kgm) ± 5%