Need help?Do you have a question about the Lambretta 150 d and is the answer not in the manual?
General| Cooling System | Air-cooled |
|---|---|
| Starting System | Kickstart |
| Fuel System | Carburetor |
| Width | 700 mm |
| Dry Weight | 105 kg |
| Engine Type | 2-stroke, single cylinder |
| Weight | 105 kg |
| Front Brake | Drum |
| Rear Brake | Drum |
Details on mixing oil with petrol for the engine and recommended grades.
Recommended oils for gearbox, transmission, and greases for frame lubrication.
General introduction to the Lambretta, its design, and purpose for users.
Details on engine capacity, bore, stroke, HP, and carburettor.
Information on the clutch, cooling system, and ignition details.
Description of the gearbox, transmission, and steel tube frame structure.
Explanation of the front and rear suspension mechanisms.
Details on internal expanding brakes and their controls.
Information on wheels, tyre inflation, and fuel tank capacity.
Details on the headlight, tail light, switch, and key safety lock.
List of provided tools and available optional accessories.
Diagram of electrical circuits and switch lever positions.
Advice for the first 900 miles to ensure proper operation and longevity.
Instructions for fueling, including petrol and oil mixing proportions.
Guidance on fitting, cleaning, and gap adjustment for spark plugs.
Carburetor adjustment, idle settings, and engine starting steps.
Detailed list of lubrication points and their servicing schedule.
Explanation of symbols used in the lubrication diagram.
Specific lubrication points and greases for overhauling the scooter.
Instructions for lubricating specific bearings during assembly.
Guide to smooth gear changes using the twistgrip control.
Step-by-step instructions for removing front and rear wheels.
Recommendations for initial operation and engine stopping procedures.
Important steps for removing tyres from rims, including deflation.
Checks and lubrication required at 900-mile intervals.
Oil changes, bearing lubrication, and filter cleaning at 1800 miles.
Process for decarbonizing engine components at 3000 miles.
How to adjust the front and rear brakes for optimal performance.
Checking ignition timing and maintaining the spark plug gap.
Steps for general cleaning and protection during periods of inactivity.
Causes and remedies for engine starting failures and stalling.
Diagnosis and repair of engine knocks and missing cylinder issues.
Causes and solutions for carburetor explosions and pre-ignition.
Troubleshooting steps for lack of power and engine overheating.
Listing of agents in various global regions.
Listing of agents in Asian, Oceania, and additional European regions.
Italian Lambretta dealers from Agrigento to Brescia.
Italian Lambretta dealers from Busto Arsizio to Verona.
Italian Lambretta dealers from Caserta to Pordenone.
Italian Lambretta dealers from Portogruaro to Voghera.
Italian Lambretta dealers from Sanremo to Urbino.
Italian Lambretta dealers from Varese to Viterbo.
Italian Lambretta dealers from Viareggio to Voghera.
Details on world speed records achieved by Lambretta 125cc models.
To Next Page
