Need help?Do you have a question about the Lambretta 150 ld and is the answer not in the manual?
General| Engine Capacity | 148cc |
|---|---|
| Cooling System | Air-cooled |
| Transmission | 3-speed manual |
| Fuel System | Carburetor |
| Fuel Capacity | 6.5 liters |
| Bore x Stroke | 57 mm x 58 mm |
| Weight | 95 kg |
| Engine Type | Single-cylinder, 2-stroke |
| Rear Suspension | Coil spring |
| Brakes | Drum brakes |
| Frame | Tubular frame |
| Rear Suspension Detail | Swingarm with coil spring and hydraulic damper |
Steps for taking apart and putting back the kick start.
Procedures for small end bush maintenance.
Specifications for cylinder and piston assembly.
Tolerances for piston and gudgeon pin fitting.
Specifications for piston ring clearance.
To Next Page
