Lambretta V50 Special User Manual

ASSEMBLY MANUAL
Date: 04.06.2018 Version: 1
Model:
VIN No.:
Page 1 / 6
Schorm
Groll
Created by:
Conrmed by:
V50 Special, V125 Special, V200 Special
VDLL*************
ASSEMBLY MANUAL LAMBRETTA V50, V125, V200
General information
• Check the vehicle for transport damages before
starting assembling.
• Carry out the points carefully and step by step.
• Make sure that the vehicle is handed over visually
as well as technically awless.
Unboxing vehicle
• Remove the straps and lift off the box (1).
• Remove the cardboard boxes and the plastic cover
(2).
• Remove the holder (3) in the leg area.
• Remove the cartons (4) with which the vehicle is ja-
cked up.
• Remove the bolts and cover (5) on the rear of the
vehicle.
Content
• General information
• Unboxing vehicle
• Scope of delivery
• Assembling of the components
• Inserting the battery
• Check oil level
• Check tire pressure
• Functional check before the test drive
• Test ride
1
2
3
4
5

Lambretta V50 Special Specifications

General

Fuel System	Carburetor
Cooling	Air-cooled
Seat Height	770 mm
Front Suspension	Telescopic fork
Tire Size (Front/Rear)	3.00-10 / 3.00-10
Engine Type	Single-cylinder
Transmission	Automatic
Top Speed	45 km/h
Rear Suspension	Shock absorber
Front Brake	Drum
Rear Brake	Drum brake

Summary

General Information

Unboxing Vehicle

Scope of Delivery

Assembling of the Components

Inserting the Battery

Check Oil Level

Check Tire Pressure

Functional Check Before Test Drive

Test Ride