What to do if my Lamona LAM2603 does not operate?
If your Lamona Scrubber isn't operating, the issue might stem from a defective or tripped mains fuse. Inspect the fuses located in the fuse box, and replace or reset them if needed. Alternatively, the product might not be connected properly, so ensure all power connections are securely in place.
How to get rid of lingering smells from Lamona Scrubber?
If your Lamona Scrubber is working normally but smells persist, inspect the grease and charcoal filters. Clean them with warm water and a mild detergent, and consider replacing the charcoal filters.
How to fix lamps that don't operate in Lamona LAM2603 Scrubber?
If the lamps in your Lamona Scrubber fail to operate, first disconnect the mains electricity supply before adjusting or replacing the lamps. Then, ensure that the unit is receiving power by checking if there is power. If the power is cut, check the fuses in the fuse box and replace or reset them if necessary.
General| Model | LAM2603 |
|---|---|
| Category | Scrubber |
| Voltage | 220-240V |
| Frequency | 50Hz |
| Cable Length | 5m |
Essential general safety measures for operating the appliance, covering usage and maintenance.
Specific warnings to keep children away from the appliance and its packaging materials.
Guidelines for safe electrical handling, including cable care and fuse compatibility.
Visual guide to all parts of the extractor, including frames, body, filters, and adapters.
Explanation of the functions of each button and light on the extractor's control panel.
Instructions for regular cleaning of the extractor's external surfaces with mild detergent.
Steps for cleaning and replacing grease filters to ensure efficient operation and prevent fire hazards.
Guidance on changing carbon filters for effective odour removal in recirculation mode.
Details on ducted and recirculation extraction, including filter requirements for each method.
Instructions for setting up the extractor for external ducting, including kit recommendations.
Steps for installing the extractor for recirculation, focusing on fitting carbon filters correctly.
To Next Page
