CAUTION! If there are other appliances installed in the same cabinet, do not
use them at the same time as the function: Pyrolysis. It can cause damage to
the appliance.
1. Clean the inner side of the door with hot water, so that the residues do not burn from
the hot air.
2. Turn on the appliance and select from the main menu the function: Pyrolysis. Press
to confirm.
3. Set the duration of the cleaning procedure:
Option Description
Quick 1 h for a low degree of dirt
Normal 1 h 30 min for a usual degree of dirt
Intense 2 h 30 min for a high degree of dirt
4. Press to confirm.
When the pyrolytic cleaning starts, the appliance door is locked and the lamp
does not work.
To stop the pyrolytic cleaning before it is completed, turn off the appliance.
WARNING! After the function is completed, the appliance is very hot. Let it cool
down. There is a risk of burns.
After the function is completed, the door stays locked for the cool down phase.
Some of the appliance functions are not available during the cool down phase.
Cleaning the oven door
The oven door has four glass panels. You can remove the oven door and the internal glass
panels to clean them.
The oven door can close if you try to remove the glass panels before you
remove the oven door.
CAUTION! Do not use the appliance without the glass panels.
1. Open the door fully and hold the two door hinges.
35