_ 09
Installation
Before installation
The product should only be installed by a
suitably competent person.
*Please ensure the power socket accessible after installation
The product must be installed in
accordance with all local regulations.
Prior to installation, visually check the
product for any damage/defects. Do not
install if any issues are found.
Damaged products may cause risks to your
own safety.
Let the appliance stand upright for
approximately 24 hours before connecting it
to the power source. This helps to reduce the
possibility of a cooling-system malfunction
from handling or transportation.
The appliance is intended for installation
between Howdens kitchen cabinets.
Kitchen cabinets must be set level and fixed.
06 - Installation
The following installation drawings are
representational and may not
.ecnailppa ruoy htiw yltcaxe hctam
Integrated installation
When integrating your wine cooler into a fitted
kitchen, sufficient space is required to allow the
wine cooler to be fully ventilated and for the door
to be opened fully . The appliance may need to be
positioned off centre to overcome any door
collision issues.
Ensure your cabinet aperture meets the
minimum dimensions listed below.
CABINET OPENING DIMENSIONS
mm (Minimum)
Height 870
Width 305
Depth 570
305mm
Min
295mm
870 - 890 mm
570mm
611mm (Inc handle )
User manual LAM6913
To Next Page
Loading...
