Need help?Do you have a question about the LaMotte Tracer pH/TDS/Salt/Temp PockeTester and is the answer not in the manual?
General| Brand | LaMotte |
|---|---|
| Model | Tracer pH/TDS/Salt/Temp PockeTester |
| Category | Test Equipment |
| Language | English |
Identifies and describes the physical controls and indicators on the meter's front panel.
Explains the various elements and icons shown on the meter's LCD display for readings and status.
Details how to turn the meter on/off and information about battery indicators and auto-power off.
Explains how the meter detects and displays the unit for the connected electrode.
Describes the meter's automatic calibration process and related display indicators.
Explains the TDS conversion ratio and how to adjust it for TDS measurement.
Provides instructions on how to switch between Celsius (°C) and Fahrenheit (°F) for temperature display.
Explains how to freeze the current reading on the display using the HOLD function.
Details the auto-power off feature and how to disable or re-enable it.
Describes the "BAT" indicator and its meaning for battery status.
Outlines the initial steps for preparing and using the meter before taking measurements.
Explains how to switch between different measurement modes like pH, Conductivity, Salinity, and TDS.
Details the procedure for saving current measurement readings for later recall.
Explains how to access and view previously stored measurement data.
Describes the process for erasing all stored measurement data from the meter's memory.
Provides step-by-step instructions for taking accurate pH, Conductivity, TDS, and Salinity measurements.
Guides the user through the process of calibrating the meter for accurate pH measurements using buffer solutions.
Instructs on how to prepare the necessary buffer solutions for pH calibration.
Explains the "CAL" indicator and when recalibration is suggested or required.
Describes the "RENEW" indicator, warning about electrode performance and potential replacement.
Details the procedure for calibrating the meter for Conductivity, Salt, and TDS measurements using standards.
Provides instructions on proper cleaning, storage, and handling of the meter's electrode to ensure longevity.
Offers specific guidance on cleaning the electrode to maintain performance and avoid damage.
Details the steps required to replace the meter's batteries, including polarity and component access.
To Next Page
