815 LX / UTILIZATION
CHAPTER 3 PROGRAMMING 29
1. 1. TABLE OF FACTORY-PROGRAMMED CYCLES
The washer is supplied with 4 factory-programmed cycles that are designed to meet
most washing needs. However, all cycles can be modified to meet customer
requirements (
see page 31
).
Water consumption estimated per phase (depends on the baskets/racks used): 12 litters.
Output from acid and detergent pumps (depends on the chemicals used) : 280 ml/min.
Volumetric
Flasks
Bactério.
Virology
Chemistry
Biology
Agarose
Gel
SEQUENCES POSSIBILITIES
PROG.
01
PROG.
02
PROG.
03
PROG.
04
PREWASH 1 TIME 0 to 30 mn 1 2 2 2
PREWASH 1 TEMPERATURE 0 to 95 °C 0 0 0 90
PREWASH 1 DETERGENT 0 to 360 s 12 12 12 30
PREWASH 2 TIME 0 to 30 mn 0 0 0 1
PREWASH 2 TEMPERATURE 0 to 95 °C / / / 0
PREWASH 2 DETERGENT 0 to 360 s / / / 0
WASH TIME 0 to 30 mn 4 4 2 2
WASH TEMPERATURE 0 to 95 °C 50 85 70 90
WASH DETERGENT 0 to 360 s 30 30 30 36
RUNNING WATER RINSE 1 0 to 9 1 1 2 2
ACID RINSE TIME 0 to 30 mn 2 2 2 2
NEUTRALIZING ACID
0 to 360 s 30 30 30 30
RUNNING WATER RINSE 2 0 to 9 1 2 1 1
COLD DEMI. TIME 0 to 30 mn 1 0 1 1
HOT DEMI. TIME 0 to 30 mn 0 3 3 3
HOT DEMI. TEMPERATURE 0 to 95 °C / 80 80 80
DRYING TIME
(*)
0 to 90 mn / 5 5 5
DRYING TEMPERATURE
(*)
0 to 110°C 0 110 110 110
COOLING TIME
(*)
0 to 30 mn 0 5 5 5
(*) : The programmation of the hot water demineralized involve automatically a drying
and cooling period phase with fixed parameters. (see above the values in the table).
To Next Page
Loading...
