815 LX / UTILIZATION
CHAPTER 4 MAINTENANCE 38
3. EXTERNAL MAINTENANCE OF THE WASHER
The bodywork of the LANCER washer is made of stainless steel.
C
LEANING METHOD :
Weekly cleaning of the bodywork has to be done with mild cleaner.
We recommend the use of a product specifically designed for cleaning stainless steel.
The product must be applied with a soft cloth. It is very important to apply the cleaner
in the direction of the grain of the panels to avoid scratching. Drying the machine is best
performed using a squeegee or similar device to avoid the drops or spots that can be left
by a cloth.
S
PRAYING THE UNIT WITH LIQUID IS PROHIBITED
.
C
LEANING PRODUCTS
:
Detergents, soaps
:
Many products are commercially available to clean stainless steel, however, they must
not contain chlorinate.
Abrasive powders
:
These products may scratch stainless steel surfaces and modify the appearance. They
can, nevertheless, be useful on dirt that is difficult to remove.
To Next Page
Loading...
