lancer 810LX User Manual

810 LX / 815LX
USER MANUAL

lancer 810LX Specifications

General

Brand	lancer
Model	810LX
Category	Dishwasher
Language	English

Summary

CHAPTER 2 BEFORE YOU START

1. SAFETY ADVICES

General safety recommendations for operating the washer, including usage precautions.

1.1 PRECAUTIONS FOR USE

Specific warnings and guidelines for safe operation, including avoiding explosive environments.

1.2 USE

Guidelines on the proper use of the washer, including door locking and cycle interruptions.

2. OPENING THE WASHER'S DOOR

Procedure for safely opening and closing the washer door, with warnings.

4. WASHING PRODUCTS

Details on approved washing products, categories, and usage guidelines.

4.1 WASHING PRODUCTS CATEGORIES

Explains non-foaming detergents and neutralizing acids suitable for the washer.

4.2 INSTRUCTIONS TO RESPECT IN CASE OF HANDLING THE WASHING PRODUCTS

Safety instructions for handling washing products and informing personnel of risks.

6. USING OF THE ACCESSORIES

CHAPTER 3 WASHING CYCLE LAUNCHING

1. DESCRIPTION AND BASIC FUNCTIONS OF KEYPAD

2. LAUNCHING OF A CYCLE

2.2 CYCLES

Overview of the 4 factory-pre-established wash programs and how to select them.

2.3 LAUNCHING THE CYCLE

Steps and display messages for initiating a wash cycle, including error conditions.

3. END OF CYCLE

3.1 OPENING OF THE DOORS

Instructions and safety warnings for opening the washer door after a cycle.

4. ACCESS TO USER MENU

4.1 MODIFYING THE WASHING CYCLES

4.3 DOSING PUMP PRIMING

4.6 READING OF CYCLE FAULTS

5. TABLE OF FACTORY-PROGRAMMED CYCLES – 810 LX

6. TABLE OF FACTORY-PROGRAMMED CYCLES – 810 LX – SUPPLY VOLTAGE 120V MONO / 60HZ

7. TABLE OF FACTORY-PROGRAMMED CYCLES - 815LX

8. TABLE OF FACTORY-PROGRAMMED CYCLES - 815LX – SUPPLY VOLTAGE 120V MONO / 60HZ

9. USER CYCLE PROGRAMMING TABLE

CHAPTER 5 MAINTENANCE OF THE WASHER

1. FILTERS

3. EXTERNAL MAINTENANCE OF THE WASHER

4. DECONTAMINATION OF THE MACHINE AND PARTS

Procedures for decontaminating the machine and parts after chemical exposure.

4.1 WHEN TO DECONTAMINATE THE WASHER?

4.2 HOW TO DECONTAMINATE THE MACHINE?

Step-by-step guide for decontaminating the washer before maintenance.

5. PREVENTIVE MAINTENANCE

6. PREVENTATIVE MAINTENANCE SCHEDULE

Table outlining daily, biannual, yearly, and 5-yearly maintenance tasks.

7. RECOMMENDED SPARE PARTS 810 LX – 815 LX

CHAPTER 6 PROBLEMS

1. INCIDENTS

1.1 THE DETERGENT OR NEUTRALIZING AGENT DOES NOT ENTER THE WASHER

Troubleshooting steps if detergent or neutralizer isn't supplied.

1.2 THE WASHER DOES NOT FUNCTION

Checks for the washer not functioning, such as power supply or circuit breakers.

2. WARNINGS

Common warning messages displayed by the washer and their meanings.

2.1 LACK OF PRODUCTS

2.2 HOT CHAMBER

2.3 FULL BASIN

3. FAULT ALARMS

General information on fault alarms and how to clear them.

3.1 FAULT N°1 PROBE FAULT.

Diagnosis and corrective action for probe faults affecting temperature readings.

3.2 FAULT N°2 EMPTYING FAULT.

Troubleshooting for emptying faults, checking pumps and filters.

3.3 FAULT N°3 HEATING EXCESS.

Addressing heating excess faults when basin temperature exceeds programmed levels.

3.4 FAULT N°4 HEATING FAULT.

Troubleshooting heating faults related to insufficient temperature increase.

3.5 FAULT N°5 NO WATER.

Diagnosing and resolving 'NO WATER' faults related to filling issues.

3.6 FAULT N°6 DOOR FAULT

Corrective actions for 'DOOR FAULT' when the door is opened during a cycle.

3.7 FAULT N°7 LEVEL FAULT.

Troubleshooting 'LEVEL FAULT' caused by water level fluctuations.