lancer 810LX - 2. WARNINGS; 2.1 LACK OF PRODUCTS; 2.2 HOT CHAMBER; 2.3 FULL BASIN

CHAPTER 6
PROBLEMS
NU_810-815_LX_ANG_1306
63
2. WARNINGS
2.1 LACK OF PRODUCTS
*only for washer with level float
WARNI NG
L A C K O F C H E M I C .
INCIDENT: The following message is displayed if lack of chemical at start of cycle when
you press the key.
ACTION: Check level of additive tanks, replace additive low level tank.
2.2 HOT CHAMBER
W ARNI NG !
H O T CHAMBER
INCIDENT: the following message is displayed if the temperature inside the washing
chamber is above the safety temperature set point for door opening.
ACTION: At the end of the cycle, let the washer chamber and contents cool before
opening the chamber door.
2.3 FULL BASIN
W ARNI NG !
F U L L B A S I N :
INCIDENT: If the wash chamber contains water at the beginning of the cycle, either from
the interruption of the previous cycle or due to an abnormal addition of water to the
chamber.
ACTION: The washer is automatically emptied and the cycle then proceeds normally.