lancer 810LX - Copyright - Liability; Manufacturer; Lx; 815 Lx Range

CHAPTER 1
INTRODUCTION
NU_810-815_LX_ANG_1306
10
1. COPYRIGHT – LIABILITY
All rights reserved.
GETINGE LANCER pays close attention to all technical developments and continuously seeks to
improve its products and services in order to provide an adequate response to the needs of its
clients.
GETINGE LANCER therefore reserves the right to modify the related documentation without prior
notice.
2. MANUFACTURER
The LABEXIA range is manufactured in our Center of Excellence in washers glassware:
GETINGE LANCER
30, Bd de l’Industrie - Z.I. Pahin
31170 Tournefeuille - France
3. 810 LX / 815 LX RANGE
810 LX / 815 LX washers belongs to the LABEXIA range of washers and washer for the cleaning
and drying of labware in the chemistry, microbiology, quality control and analytical laboratories.
Fully programmable, easy to use, 810 LX/ 815 features the automatic electric door locking for the
users comfort and safety.
Some of the main features of 810 LX / 815LX washers:
- Microprocessor control, with 4 pre-set programs featuring programmable parameters
- Easy loading and unloading thanks to the ergonomic loading level (plinth option), the
extractable runners for the baskets and the automatic electric door lock.
This washer has been developed and manufactured following the standards (CE or UL).
For the washers in conformity with the CE standards, a “CE conformity declaration” is delivered
with the machines.