lancer 810LX - 2. LAUNCHING OF A CYCLE; 2.2 CYCLES

CHAPTER 3
WASHING CYCLE LAUNCHING
NU_810-815_LX_ANG_1306
27
2. LAUNCHING OF A CYCLE
BEFORE START, VERIFY THAT THE TAPS OF ENTRANCE OF
WATER ARE OPENED.
2.1 SWITCHING ON
Push the key .
The display indicates the number of the last executed program and the type of washer.
P R O G R A M N ° 0 4
LANCER
If the previous cycle has been stopped before the end, the display indicates:
WARNI NG
F A U L T Y C Y C L E
Press
to return to the initial state.
2.2 CYCLES
The washer is delivered with 4 pre-established programs at the factory (see pages 46 to
48). Enter the number of the program to select the cycle, with the help of the keys of the
numeric keypad.
PROGRAMME 01: VOLUMETRIC FLASKS
 Prewash with cold water with the detergent
 Wash with hot water with the detergent.
 Acid rinse with the neutralizant acid
 Rinse with demineralised water
 Final rinse at 50° with demineralised water (only on 810LX)