lancer 810LX - Information Available During the Wash Cycle

CHAPTER 3
WASHING CYCLE LAUNCHING
NU_810-815_LX_ANG_1306
30
2.4 INFORMATION AVAILABLE DURING THE WASH CYCLE
BUTTON DISPLAY INDICATION COMMENT
1111
1
1
11
1
11
1
11
1
1
Temperature at bottom
of chamber
Instantaneous temperature read by
the probe located in bottom of
chamber
Programmed
temperature
Programmed temperature for phase
in progress
2
2222
22
2222
2
2222
Remaining time of the
phase
Decreasing time of a phase
memorized starting from the same
complete cycle already carried out
Past time of the phase Past time of the phase in progress
Programmed time of
the phase
Time programmed for the phase in
progress
Sequence duration
Past time of the sub phase
(sequence) in progress
Maximum time
remaining
Decreasing time of the cycle in
progress
Past time Past time of the cycle in progress
Maximum time
Maximum time remainder of the
cycle memorized starting from the
same complete cycle already carried
out
/
/
/
//
/
/
//
/
/
//
/
/
/
3
3
3
33
3
3
33
3
3
33
3
3
3
-
--
-
-
-
--
--
--
-
-
-
-
phase in progress Name of the phase in progress
Information on the
phase in progress
Information on the progress of the
phase
Programme name Name of the programme in progress
/
/
/
/
/
//
//
/
//
///
/
4
4
4
44
4
4
44
4
4
44
4
4
4
+
+++
++
+
++
++
+
+
+
+
+
(no specific display) Fast advance
Allows to skip a phase of the cycle (if
selected ON in the configuration
machine)
Relay status: 1 to 8
If test mode is activated, the display
indicates status of the relays from 1
to 8
Relay status: 9
If test mode is activated, the display
indicates status of the relays from 9
to 16