815 LX / UTILIZATION
CHAPTER 4 MAINTENANCE 39
Acid products
:
They should only be used in very specific cases.
Acetic acid can be used to remove mineral stains.
It is possible to find products made of phosphoric or nitric acid which are especially
made to clean stainless steel. It is very important to strictly adhere to the chemical
manufacturer's recommendations.
Chlorinated disinfectants can only be used in a very diluted formulation with cold
water, reduced contact time, and abundant rinsing.
CLEANING SHOULD BE FOLLOWED BY ABUNDANT RINSING
TO REMOVE ALL TRACES OF THE CLEANING PRODUCT
THAT WAS USED
(
THIS SHOULD BE DONE WITH A SQUEEGEE
AND SOFT CLOTH
).
To Next Page
Loading...
