DIRECTION INDICATORS
Front
To change the bulb, proceed as follows:
❒ rotate the cover C fig. 125 anticlockwise;
❒ remove the bulb D fig. 129 from its housing E.
Side
To change the bulb, proceed as follows:
❒ adjust the lens A fig. 130 to compress in the
internal catch B, then pull the unit outwards;
❒ turn the bulb holder C anticlockwise, extract the
bulb and replace it;
❒ refit the bulb holder C in the lens and turn it
clockwise;
❒ refit the unit making sure that the internal catch
B clips into position.
fig. 129
L0F0071
fig. 130
L0F0209
174
GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
INDEX
To Next Page
