Why is the seeding rate different than desired on my Land Pride PS1572 Seeders?
The seeding rate may differ from what you expect if seed treatment chemicals build up in the seed cup. This buildup can cause breakage of the seed cup shaft if not cleaned regularly.
How to fix uneven seed spacing on Land Pride PS1572?
To address uneven seed spacing or stand with your Land Pride Seeders, take the following steps: * Check the seed cup for any plugging. * Reduce your ground speed. * Inspect the packer rollers for any trash or mud buildup.
What to do if the feed cup sprocket is locked on Land Pride PS1572?
If the feed cup sprocket is locked up on your Land Pride Seeders, check for any foreign matter lodged in the seed cup sprocket.
Why are the packing rollers not turning freely on my Land Pride Seeders?
If the packing rollers on your Land Pride Seeders aren't turning freely, check for any trash or mud buildup on the roller end.
Section to record dealer contact details for service and support.
Includes safety at all times, alert symbols, signal words, and children precautions.
Procedure for safely shutting down and storing the tractor.
Precautions for tire handling, safe towing, and transporting the seeder.
Importance of safety chains and safe practices during maintenance activities.
Essential steps for emergency preparedness and recommended protective equipment.
Warnings for fluid hazards and importance of safety lights and devices.
Prohibits riders and recommends seat belts and ROPS.
Tractor horsepower and 3-point hitch requirements for lifting and controlling the seeder.
Reference to torque values chart for proper hardware tightening.
Instructions for using sling brackets for lifting the seeder.
Procedure to reassemble tire track removers for operation.
Pre-operation inspections and checks before using the seeder.
Basic steps for safely shutting down the tractor and implement.
Detailed procedure for connecting the seeder to the tractor's 3-point hitch.
Procedure for connecting and verifying tractor LED light operation.
Safety guidelines and procedures for transporting the seeder.
Steps for safely filling the seeder's seed box with seed.
Explanation of the seeder's ground-driven metering system and rollers.
General safety warnings and initial setup for operating the seeder.
Guidance on seeding operations, speed, and pattern development.
Procedure for safely detaching the seeder from the tractor.
Procedure to change drive speed by adjusting sprockets.
Instructions for adjusting seed cup gate positions for seed delivery.
Steps to calibrate and adjust the seeder's seeding rate for specific seeds.
General advice on inspection, bolt tightening, and label replacement.
Checks and lubrication for the seeder's roller chain drive system.
Checking and ensuring proper movement of packing rollers.
Procedures for cleaning and preparing the seeder for storage.
Information on how to order genuine Land Pride parts and touch-up paint.
Details on lubrication types, points, and intervals for various components.
Lubrication instructions for roller bearings.
Lubrication for the chains connecting packer rollers to seed cup rollers.
Description and installation of the agitator extension kit.
Details on the SMV sign accessory and mounting components.
General| Brand | Land Pride |
|---|---|
| Model | PS1572 |
| Category | Seeders |
| Language | English |
To Next Page
