99
Rotary Cutters Single Deck
Specifications & Capacities
Designs, specifications, features and information are subject to change without notice.
RCR1860 & RCR1872 Models
RCR1860 RCR1872
Machine Weight 599 lbs. 737 lbs.
With laminated tailwheel, slip clutch driveline, Front Rubber Guards and Rear
Metal Band
Hitch Category l with Floating Clevis Top Link, Quick Hitch Adaptable
Cutting Width 60” 72”
Overall Width 65" 77"
Overall Length 99 3/8” 110”
Deck Height
(Bottom of Deck to Bottom of Skid Shoe)
7 1/2” 9”
Cutting Height 1 1/2” - 13” 1 1/2” to 11 1/2”
Cutting Capacity 2” Diameter
Recommended Tractor PTO HP 20-65 HP
PTO Speed 540 rpm
Gearbox 1:1.93 Speed-Up Beveled Gears
Cast Iron Housing
1:1.46 Speed-Up Beveled Gears
Cast Iron Housing
Gearbox Oil Capacity & Lubricant 4.25 Pints of EP 80-90W oil 4.00 Pints of EP 80-90W oil
Deck Construction All Welded Deck
Deck Material Thickness 10 Ga. (.134”)
Side Skirt Material Thickness 10 Ga. (.134”)
Skid Construction Full length welded on
Stump Jumper Round Pan 10 ga. x 24” with Blade Holder Bar
Blades (2) 1/2” x 3" Heat Treated Alloy Steel
Free-Swinging High Lift - Low Friction
Blade Bolts Keyed with harden flat washers & lock nuts.
Blade Tip Speed 16,363 fpm 14,955 fpm
Driveline ASAE Category 3 Shear Bolt or 2-plate Slip Clutch
Driveline Protection Optional - Center Shearbolt protection
Optional - Center Bolt 2 plate Slip Clutch
Tailwheel Mount Assembly Welded A-arm and Caster Fork with 360 degree swivel
Tailwheel 4” x 8” x 15” Laminated Tire with cast iron hub or 4” x 16” Molded Rubber Tire
Front Guard Optional: Rubber Belting
Accessory: Chain Guard
Rear Guard Standard: Metal Band
Optional: Rubber Belting
Accessory: Chain Guard
312-849S continue on next page
1/05/12
To Next Page
Need help?
General
