To Next PageTo Next PageWhy Land Pride Tiller tines operating behind tractor tires show increased wear?
Increased wear on the tines operating behind the tractor tires of your Land Pride Tiller can occur because the tractor tires can compact the soil, causing increased wear on tines operating in that compacted soil, which is considered normal wear. Consider replacing worn tines.
Why is oil leaking from my Land Pride Tiller gearbox?
Oil leaking from your Land Pride Tiller gearbox could be due to damaged seals and/or gaskets, so replace them. Another reason could be that the gearbox is overfilled, so drain the oil to the proper level.
General| HP Range | 15-30 hp |
|---|---|
| Hitch Type | Category 1 |
| Blade Type | L-shaped |
| Number of Blades | 24 |
| Working Width | 50 inches |
| Cutting Width | 50 in |
| Required PTO HP | 15 HP |
| Rotor Diameter | 16 in |
General safe operation practices.
Identifies hazard symbols, signal words, and notices.
Precautions for children and safe tractor parking.
Guidelines for safety chains and safe transport.
Precautions for tire care and safe maintenance.
Emergency kits, first aid, and personal protective equipment.
Dangers of high-pressure fluids and use of lights.
Importance of safety restraints and keeping riders off.
Health hazards of silica dust and chemical safety.
Procedures to avoid underground utilities before digging.
Explanation of DANGER, WARNING, and CAUTION labels.
Guidance on using the manual and obtaining support.
Importance of serial number and support contacts.
Pre-assembly checks, tractor specs, and torque values.
Steps for safely shutting down the tractor.
Adjusting park stand and attaching 3-point hitch assembly.
Connecting driveline and installing deflector chain.
Connecting tiller to tractor and quick hitch operation.
Storing park stand for transport.
Verifying hitch and connecting driveline to PTO.
Checking and assembling driveline halves.
Verifying no interference during operation.
Pre-operation checks and critical safety warnings.
Procedures for safe transport on public roads and terrain.
Steps for safely detaching the tiller from the tractor.
Pre-operation checks and step-by-step tilling guide.
Adjusting 3-point hitch, drive chain, and rear deflector.
Adjusting skid shoes for desired tilling depth.
Routine maintenance and driveline servicing.
Procedures for detaching the driveline.
Maintenance for shear bolt and slip clutches.
Procedure for initial slip clutch operation.
Continued run-in and slip clutch disassembly.
Replacing tines and preparing for long-term storage.
Information on obtaining replacement parts.
Locations and types of lubrication for various components.
Lubrication for rotor shaft bearing, gearbox, and input shaft.
Detailed technical specifications for the RTR05 series.
Overview of the tiller's key features and advantages.
Common problems and their solutions for the tiller.
Specifications for bolt torque based on size and grade.
Specific torque values for rotor bearings.
Details of the product warranty coverage.
