Landa HS-3000 - Operating Instructions

8.913-943.0 • LANDA HS • Rev. 4/13
9
PRESSURE WASHER
OPERATOR’S MANUAL
OPERATING INSTRUCTIONS
STEP 1: Connect the high pressure
hose quick coupler from attached
pressure washer to discharge nipple
by sliding the quick coupler collar
back and inserting quick coupler on
coupler nipple and pushing the quick
coupler collar forward to secure it.
STEP 2: Grip spray gun and wand
handle securely.
Start attached pressure washer
according to the manufacturers in-
structions. When a steady stream of
water flows from the spray gun and
wand the machine is ready for cold
water cleaning.
STEP 3: For hot water washing,
turn the HS burner switch to the
ON position. (The burner will light
automatically.)
89139430-9
89139430-10
Burner
Switch
Selection of high or low pressure is accompanied by
turning the handle.
NOTE: High pressure nozzle must be inserted at end
of wand to obtain high pressure. To apply soap read
operator's manual.
NOTE: High pressure hose, nozzles, gun and wand
are included with attached pressure washer and not
part of model HS-3000.
IMPORTANT NOTICE: Read operating instructions of
connected pressure washer.
Variable Pressure
Control Handle
Trigger
Variable Pressure
Wand (VP)
High
Pressure
Nozzle
Brass Soap
Nozzle
* Not Included