Need help?Do you have a question about the Landa Platinum Series and is the answer not in the manual?
General| Brand | Landa |
|---|---|
| Model | Platinum Series |
| Category | Pressure Washer |
| Language | English |
Emphasizes reading the manual before use.
Covers proper grounding, GFCI use, and avoiding water near electrical components.
Addresses safe fuel types, ventilation for combustion, and fire risks.
Details risks from flammable liquids, asphyxiation, and refueling.
Warns about high pressure fluid piercing skin and causing amputation.
Includes kickback, protective gear, coil cooling, and fluid restrictions.
Covers child operation, fatigue, stability, and area clearance.
Specifies oil type and change intervals for the pump.
Details acceptable fuel types and tank/filter maintenance.
Provides diagram and instructions for setting burner electrodes.
Recommends inspecting ignition circuit components and testing the transformer.
Explains the function of the fuel solenoid valve and its control.
Details how to adjust fuel pressure and the need for a bypass plug.
Advises cleaning or replacing the burner nozzle seasonally.
Explains how to adjust air bands for optimal burner performance and troubleshoot smoky exhaust.
Provides procedures for cleaning coils, including using deliming powder.
Explains that nozzles are calibrated and vary in bore size and angle.
Mentions unloader valves are factory preset but may need adjustment.
Refers to cold weather procedures to prevent freezing damage.
Details steps to protect the machine from freezing temperatures.
Addresses causes and solutions for low pressure issues.
Lists possible causes and solutions for the burner failing to ignite.
Continues troubleshooting steps for burner ignition failures.
Identifies causes and solutions for a smoking machine.
Lists causes and solutions for low water temperature issues.
Addresses causes and solutions for excessively hot water output.
Troubleshoots issues with the pump motor stopping or starting slowly.
Covers causes and solutions for relief valve leaks or spraying water.
Addresses issues with the chemical metering system not drawing fluid.
Troubleshooting for issues with chemical draw-up.
Identifies causes and solutions for the burner motor not running.
Addresses causes and solutions for vibration in the discharge line.
Troubleshooting for the pump protector leaking water.
Addresses causes and solutions for the burner remaining on when the gun is off.
Troubleshoots low pressure issues despite normal pump operation.
Identifies causes and solutions for a noisy pump.
Addresses causes and solutions for water contamination in the oil.
Troubleshoots water leaks originating from under the pump.
Identifies causes and solutions for oil leaks.
Troubleshoots issues preventing the unit from automatically starting.
Addresses timer faults preventing automatic shutoff.
Troubleshoots issues preventing the system from reaching full pressure.
Addresses causes and solutions for pressure spikes during bypass.
Troubleshoots unloader cycling issues during bypass operation.
Lists part numbers and descriptions for exterior components.
Continues the parts list for exterior components.
Lists part numbers and descriptions for the PHW control panel.
Lists part numbers and descriptions for the PHWS control panel.
Continues the parts list for the PHWS control panel.
Lists part numbers and descriptions for the tank assembly.
Lists part numbers and descriptions for the chassis.
Lists part numbers and descriptions for the power platform.
Continues the parts list for the power platform.
Lists part numbers and descriptions for pump assemblies.
Provides a schedule for regular maintenance tasks like oil changes and filter cleaning.
Details warranty coverage for parts and labor by duration.
Lists items and conditions not covered by the warranty.
Explains the process for requesting warranty service from LANDA.
Disclaims liability for incidental or consequential damages.
To Next Page
