Why does my Landa Pressure Washer unloader cycle on and off?
The unloader may cycle due to a clogged high-pressure filter or incorrect nozzle size. Remove and clean the filter and nozzle(s). Verify the nozzle size is correct for your Landa pressure washer.
What to do if my Landa Pressure Washer spray gun is leaking?
If your Landa Pressure Washer spray gun is leaking, it might be due to foreign matter stuck between the valve seat and ball. Remove the foreign matter. If the leaking continues, replace it with Repair Kit (Part #81-21227).
How to fix a leaking quick coupler on a Landa WATER JET SYSTEM?
A leaking quick coupler on your Landa Pressure Washer is likely due to a worn O-ring. Replace the O-ring with Part #2-0121.
General| Brand | Landa |
|---|---|
| Model | WATER JET SYSTEM |
| Category | Pressure Washer |
| Language | English |
User must understand instructions and warnings. Keep for future reference.
Critical safety warnings including high-pressure hazards, protective gear, and operational precautions.
Steps for connecting the Water Jet to the pressure washer and initiating cleaning.
Information on swivel weeping, lubrication schedule, and its one-year warranty.
Guide to selecting correct nozzle sizes based on pressure and desired flow rate.
To Next Page
